SATA.com - SATAjet 100 B - the New Generation of Primer and Filler Guns

New Spray Gun Series

„Quality starts with the foundation“. With this motto, SATA is now launching the SATAjet 100 series, the new spray gun range for primer materials which will replace the corresponding SATA KLC models with the nozzle sizes 1.6 – 1.7 – 1.8 – 1.9 – 2.0 – 2.1.

The spray gun series SATAjet 100 B consists of three different product categories, each one of them specially developed for their specific area of primer material application, yet highly flexible and universally applicable: From spot repair areas to large surfaces; with inlet pressures ranging from 0.5 to 1.5 bar.

Their fine atomisation and their large, yet compact spray pattern provide an even material application with little need for rework, i.e. a minimum of sanding time and consequently a much reduced consumption of sanding paper. Due to the atomisation technology with minimised overspray the masking effort during preparation is reduced considerably, thus offering additional potential for cost savings.

Two Ways - One Goal

According to the work method, the substrate and the material, the painter may optionally choose from different systems and a nozzle range which has been adapted to the various primer materials available.
Dubbed the „Super Speed“, the SATAjet 100 B F RP works with optimised high-pressure technology (RP = Reduced Pressure). The „Super Saver“, the SATAjet 100 B F HVLP is based on the widely known HVLP low-pressure system. The letter combination „B F” integrated into the model SATAjet 100 B P specification stands for gravity-flow cup gun and primer material application (Becher = German for cup; Füller = German for primer). The new series is completed by a special gun for polyester primers and spray putties which have to be sprayed with high film build, the SATAjet 100 B P (P = polyester).

All model versions achieve high transfer-efficiency rates, often significantly exceeding 65%, which allows working extremely efficiently and eco-friendly. Any waterborne and solvent-based material available on the market can be sprayed without restrictions with this new spray gun range.

Completely Equipped

After many field application tests end-users and the application laboratories of the paint in-dustry are convinced of the practicality of the new spray guns series:

Enhanced atomisation and spray patterns for primer materials
Ergonomically optimised spray gun body in state-of-the-art design with small di-mensions and low weight for fatigue-free working
Smoothly polished gun surface for easy and quick cleaning including material passages
Now with material-flow control with counter nut and enhanced thread, as with the top coat spray guns
Air micrometer with graduations to adjust atomisation air
Self-adjusting seals in air and material area
Comfortable trigger with low trigger-pull resistance and integrated paint needle cover, minimising cleaning effort and increasing the life time of the needle packing
CCS-Clip (Colour Code System) to mark each spray gun individually
Single-handed round/flat control to adjust the spray pattern to the object which is to be painted
QCC quick cup connector for quick cup changes and fast cleaning as well as for the use of the RPS disposable cup system without need for an additional adaptor.

SATAjet 100 BF HVLP

SATAjet 100 B F HVLP

Nozzle Size
0.6 L PVC Cup 0.75 L Alum Cup 1.0 L Alum Cup Nozzle Set

1.4 mm 146373 147447 146399 146381

1.7 mm 145722 146175 146191 145417

1.9 mm 145730 146183 146209 145425

2.1 mm 145748 147454 147462 145433

SATAjet 100 B F RP

Nozzle Size
0.6 L PVC Cup 0.75 L Alum Cup 1.0 L Alum Cup Nozzle Set

1.6 mm 145193 146134 146159 145250

1.8 mm 145201 146142 146167 145268

2.0 mm 145219 147421 147439 145276

SATAjet 100 B F P (polyester)

Nozzle Size
0.6 L PVC Cup 0.75 L Alum Cup 1.0 L Alum Cup Nozzle Set

2.5 mm 145185 146217 147470 145284

SATAjet 100 B - Brochure (pdf 436k)

SATAjet 100 B replacement parts