Dan-Am is an independent company acting as
exclusive authorized importer for SATA in the United States

Air micrometer

For the exact adjustment of the flow pressure directly at the spray gun
Product informationArt. no.

- display range 0-10 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X»

Green area for HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» up to 2.0 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X» facilitates the adjustment

Blue area for RPRP is a designation for Reduced Pressure. It allows optimized high pressure to achieve transfer efficiency above 65% while obtaining perfect finishes at the same time. This high transfer rate combined with a reduced pressure of 29 psi are the characteristics of the new RP technology. As an alternative to HVLP, it compliments the previous high-pressure technology. The provisions of EU-VOC guidelines are uniform throughout Europe and only allow the use of conventional spray guns with a minimum 65% transfer efficiency. The new SATAjet RP fulfills these requirements to the full extent. Switching from high-pressure technology to RP technology is easy and sensible for any painter. He will continue to virtually “work the way he used to”.X» up to 2.2 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X» facilitates the adjustment

- Unsuitable for cleaning in paint spray gun washing machines or manual

  cleaning in sinks, respectively.

- Sturdy design

 
 
 
 
 
 
 
 
 
 

Quick reference how to paint or maintain a paint spray gun

To the videos

 
 
 

© 2002-2014 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany - Dan-Am Company, Spring Valley MN USA
All photos, logos and text of SATA products contained on this web site are the property of SATA GmbH & Co. KG.
Dan-Am is a fully independent company that is acting as the authorized importer and distributor for SATA branded products - and Dan-Am is responsible for the content shown on www.sata.com/USA.
Dan-Am has the sole responsibility for the contents of the website.
Other products referrenced within this website are property of Dan-Am Co.
Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.