Dan-Am is an independent company acting as
exclusive authorized importer for SATA in the United States

Spray Systems

SPRAY SYSTEMS



Spray Systems

For application of large quantities of material we recommend pressure fed guns.

More

 
 
 

 

SATA vario top spray

Double diaphragm pump 1:1

More

 
 
 

 

SATA vario top spray

Double diaphragm pump 1 : 1

For connecting 1 or 2 environmentally friendly SATA HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» and RPRP is a designation for Reduced Pressure. It allows optimized high pressure to achieve transfer efficiency above 65% while obtaining perfect finishes at the same time. This high transfer rate combined with a reduced pressure of 29 psi are the characteristics of the new RP technology. As an alternative to HVLP, it compliments the previous high-pressure technology. The provisions of EU-VOC guidelines are uniform throughout Europe and only allow the use of conventional spray guns with a minimum 65% transfer efficiency. The new SATAjet RP fulfills these requirements to the full extent. Switching from high-pressure technology to RP technology is easy and sensible for any painter. He will continue to virtually “work the way he used to”.X» paint spray guns.





 
 
 

 

SATA paint pressure tanks

More

 
 
 

SATA mini set 2-litre

Pressure pot for mobile use

To feed material-fed spray guns, for example the SATAjet 3000 K spray gun series

 





SATA paint set 10-litre

Cost-effective material feeding system

To feed material-fed spray guns, suitable even for highly viscous media as, for example, high-build glazes.

 





SATA paint set 24-litre / 48-litre

Pressure pot for highly viscous materials

Special versions with connecting piece on the bottom are available for extremely high-viscous materials.

 

 

 

 

 

 

© 2002-2014 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany - Dan-Am Company, Spring Valley MN USA
All photos, logos and text of SATA products contained on this web site are the property of SATA GmbH & Co. KG.
Dan-Am is a fully independent company that is acting as the authorized importer and distributor for SATA branded products - and Dan-Am is responsible for the content shown on www.sata.com/USA.
Dan-Am has the sole responsibility for the contents of the website.
Other products referrenced within this website are property of Dan-Am Co.
Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.