The material is fed to the gun at a very high pressure and is then atomized. For work with Spray Mix or Airless guns a pump is used that feeds material with a fixed pump ratio (relation between inlet pressure and material pressure). Via special hoses (with Spray Mix systems it is a hose pair) the material is fed to the gun and is atomized there by means of special nozzles having a very small opening only. In order to improve the surface quality, Spray Mix guns use atomization air which greatly improves the finish result and thus turns the system into an even more universal tool.

SATA vario top spray
Double diaphragm pump 1:1
The high performance double diaphragm pump SATA vario top spray is the ideal system for continuous application of larger material quantities by means of atomizing air. It is thus no longer necessary to refill a cup. In conjunction with the SATA HVLP and RP paint spray guns helping to protect the environment, a state-of-the-art, extremely profitable application system for crafts and industry is created.

For all tasks requiring continuous application of substantial material / paint quantities at a steady pressure, SATA paint pressure tanks are the ideal solution.

Different tank sizes, ranging from 2 to 100 liters, and variable pressure adjustment allow almost unlimited possibilities. Accessories dedicated to special tasks, such as manual, pneumatic or electric agitators are available.
Both low viscosity paints and high viscosity or abrasive materials can be applied swiftly and without problems with SATA paint pressure tanks. There are no moving parts and, therefore no wear and tear. All material-conveying parts can be supplied in stainless steel to special order. Work becomes especially profitable if the pressure tank size can be adapted to the original material container; reducing cleaning to a minimum as the original material container is simply inserted into the paint pressure tank.

Close