Accessories


 
 
 

Cleaning systems for spray guns

Spray gun cleaning is an unpopular task amongst painters. SATA cleaning devices reliably help achieve correct gun cleaning which is of vital importance not only in order to maintain proper function of the spray gun, but also to increase the process security in the bodyshop.

 
 
 
 
 
 

Application of Rust-Proofing Material

For the application of cavity preservation and high solids wax materials a fine and even wetting of the surfaces to be protected is required. To achieve this, the SATA devices use pressurised material and air atomisation. Various lances allow the application of the material in hard to reach places.

 
 
 
 
 
 

Material feed systems

For the application of larger amounts of paint, the SATA material supply systems in combination with pressure fed SATA spray guns are the perfect solution. The universally applicable systems feature easy handling, sturdy construction, long lifetime and little maintenance.

 
 
 
 
 
 

Grit Blasting Equipment / Blow Guns

SATA grit blasting equipment allows fast and economic rust removal and descaling from chassis and other hard-to-reach components, such as e.g. fender wells, door recesses, wheel rims. The equipment may also be used on wood to improve the grain to achieve a rustic, wheathered effect.

 
 
 
 
 
 

Drying of waterborne paint systems

Due to more stingent environmental requirements, bodyshops increasingly apply Waterborne PaintsIt goes without saying that you can apply any waterborne paint with a SATA paint spray gun. There is only one limitation in this respect: Please do not use the same spray guns for the application of solvent-based as well as waterborne paints. We recommend working with two completely separate sets of spray guns, in line with the two separate paint systems.The CCS (Color Code System) which comes with each high-performance spray gun offers a clever solution to assist you in clearly marking your different spray guns. X». Due to their physical properties, the curing of waterborne materials takes longer when compared to solvent-borne. Consequently, longer cycle times reduce the productivity of the bodyshops. The SATA dry jet significantly reduces drying times and cycle times when applying environmentally friendly Waterborne PaintsIt goes without saying that you can apply any waterborne paint with a SATA paint spray gun. There is only one limitation in this respect: Please do not use the same spray guns for the application of solvent-based as well as waterborne paints. We recommend working with two completely separate sets of spray guns, in line with the two separate paint systems.The CCS (Color Code System) which comes with each high-performance spray gun offers a clever solution to assist you in clearly marking your different spray guns. X».

 
 
 
 
 
 

Accessories

 
 
 
 

© 2002-2017 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany. All photos, logos and text contained on this web site are the property of SATA GmbH & Co. KG. Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.