SATA dry jet 2 blow gun
Contact our expert team
If you have questions about this product, we’ll be happy to help with expert advice.
Highlights
With the SATA dry jet 2 dry blow gun, you can significantly shorten the flash-off and thus the cabin occupancy times. It uses the so-called Venturi principle. In addition to the supplied compressed air, a multiple of ambient air is sucked in. The uniform, wide air flow generated in the injector zone of the wide spray nozzle also contributes to a reduction in flash-off time. Thus, the SATA dry jet 2 achieves an approx. 15 % higher drying performance compared to commercially available models.
- Air connection thread G1/4 Innengewinde
- Air consumption 270 l/min 9.53 CFM
- Description SATA dry jet 2 blow gun
- Max. operating pressure 10 bar 0.69 psi
- Max. storage temperature k.A. °C k.A. °C
- Min. storage temperature k.A. °C k.A. °C
- Packaging unit 1.0 Pieces
- Recommended dynamic inlet air pressure (compliant / HVLP) 2.5 bar 0.17 psi
- Unit of packaging unit Pieces
-
* All information is provided without guarantee - errors and changes reserved.
** All information refers to the entire product range and not to individual variants.
Which nozzle technology is right for me?
RP – the Extra-Fast
The optimized high-pressure technology enables maximum working speed with VOC-compliant transfer rates and flexible handling.
HVLP – the Extra-Efficient
Thanks to low-pressure technology, HVLP nozzle systems achieve particularly high transfer rates.
