Product number: 1012658

Premium filler spray gun for automotive refinishing SATAjet 100 B F RP 1.8 RPS suitable for water- and solvent-based primers and fillers

Highlights

Suitable for waterborne and solvent-based 1K- / 2K-primers and fillers in the car refinish sector.

Fine atomization at low inlet pressure reduces sanding effort when applying filler to small areas.

Ideally suited for wet-on-wet filler application.

The large, elongated spray fan makes priming and filling large vehicle components effortless.

The high transfer efficiency enables a low overspray application and significantly reduces masking effort.

Anodized surface for time-saving cleaning.

Included in the scope of delivery:1x SATAjet 100 B F RP 1.8, 1x 0.6 l RPS cup

Description

The SATAjet 100 B can be used for a wide range of applications due to its extreme flexibility in setting the atomisation pressure. Due to the wide spray fan and fine atomisation, fillers and primers can be applied in a continuous flow despite the higher material viscosity. This saves valuable working time due to less grinding effort.

Technical data

Max. storage temperature 60 °C 140 °F
Min. storage temperature -20 °C -4 °F
Packaging unit 1.0 Pieces
* All information is provided without guarantee - errors and changes reserved.
** All information refers to the entire product range and not to individual variants.

Downloads

Spare parts

Accessories

SATA high performance grease, silicone- and acid-free, 100 ml for spray guns

SATA dosenboy, to cut out can lids from cans up to 36 cm height

SATA compressed air-driven hand agitator

SATA universal spray gun holder, folding

SATA nozzle cleaning needles (pack of 36 pieces, packed to 12 pieces each)

SATA air hose, blue, 9 mm, 10 m long, G 1/4" (female thread)

Pressure measuring devices SATA air micrometer with gauge, 1/4" (male thread) and G 1/4" (female thread)

SATA QMR, Quick Material Regulator (pack of 1 piece) for SATAjet 100, 1000 and jet 1500

Flexible quick coupling nipple G 1/4" (female thread)

Pressure measuring devices SATA adam 2 >psi< for SATA spray guns except for SATAminijet and SATAjet 5000 series

SATA cert, with archive, spray pattern block, single sheet holder and distance marker

Multi‑purpose cup system LCS 0.85 l 200 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

LCS - the Liner Multi‑purpose cup system LCS 0.85 l 200 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Pump-spray cleaning bottle, not suitable for thinner

SATA viscosity cup 4.0 mm, flow time tolerance < 1.5 sec.

SATA Spray Gun Holder

Multi‑purpose cup system LCS 0.40 l 200 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

LCS - the Liner Multi‑purpose cup system LCS 0.40 l 200 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

SATA air hose, blue, 9mm, 10 m with quick coupling, red and nipple

SATA care set spray gun care bag containing 1 large cleaning brush, 5 medium-sized cleaning brushes, 5 double-sided cleaning brushes, 12 nozzle cleaning needles, 1 tube high performance grease, silicone- and acid-free, 100 g

SATA universal spray gun and hose holder for all SATA spray guns

Multi‑purpose cup system RPS 0.3 l 125 µm flat sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

RPS - the Original Multi‑purpose cup system RPS 0.3 l 125 µm flat sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Multi‑purpose cup system RPS 0.9 l 125 µm flat sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

RPS - the Original Multi‑purpose cup system RPS 0.9 l 125 µm flat sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

SATA quick coupling nipple G 1/4" (female thread) (packing unit 5 pieces)

Gravity flow cup Reusable plastic cup, 0.125 l with QCC without fine thread

Multi‑purpose cup system RPS 0.9 l 200 µm plug-in sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

RPS - the Original Multi‑purpose cup system RPS 0.9 l 200 µm plug-in sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Cleaning brush, double-sided (pack of 10 pieces) for spray guns

SATA gravity gun holder for gravity cup spray guns

Reusable plastic cup, 0.6 l with QCC without fine thread for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B, jet RP, minijet 4400 B

Gravity flow cup Reusable plastic cup, 0.6 l with QCC without fine thread for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B, jet RP, minijet 4400 B

Accessories for spray guns SATA case olive-green (33 x 23 x 15 cm), without print, incl. insert for 2 paint spray guns; material: plastic

Multi‑purpose cup system RPS 0.6l 200 µm plug-in sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

RPS - the Original Multi‑purpose cup system RPS 0.6l 200 µm plug-in sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Cleaning brush (packing unit 10 pieces) for spray guns

Spray bottle 1.0 l

SATA air hose, blue, 9 mm, 15 m with quick coupling, red and nipple

SATA air hose, 6 mm, 10 m long with quick coupling and nipple

Air cap protector, black (packing unit 5 pieces) for SATAjet 100 and 1000 series

Gravity flow cup 0.3 l QCC reusable plastic cup, cpl. for SATAjet 5000 series, jet 4000, jet 1000, jet 100, jet 3000, minijet 4400

Spray Gun Display Plinth

Air cap protector UV, black (packing unit 5 pieces) for SATAjet 100 and 1000 series

SATA universal spray gun holder, foldable

Multi‑purpose cup system RPS UV 0.6 l 200 µm plug-in sieve QCC UV cup (black) VPE 50 For mixing, spraying, reusing and storing UV-based coating systems

RPS - the Original Multi‑purpose cup system RPS UV 0.6 l 200 µm plug-in sieve QCC UV cup (black) VPE 50 For mixing, spraying, reusing and storing UV-based coating systems

Multi‑purpose cup system RPS UV 0.6 l 125 µm flat sieve QCC UV cup (black) VPE 50 For mixing, spraying, reusing and storing UV-based coating systems

RPS - the Original Multi‑purpose cup system RPS UV 0.6 l 125 µm flat sieve QCC UV cup (black) VPE 50 For mixing, spraying, reusing and storing UV-based coating systems

Pressure measuring devices Spray pressure control unit

SATA case olive-green (52 x 29 x 19 cm) with trolley function, without print, incl. insert for 5 paint spray guns; material: plastic

Accessories for spray guns SATA case olive-green (52 x 29 x 19 cm) with trolley function, without print, incl. insert for 5 paint spray guns; material: plastic

SATA cleaning kit with 2 cleaning brushes, medium and 12 nozzle cleaning needles

Gravity flow cup Reusable aluminium cup, 0.75 l with QCC without fine thread for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B

SATA air hose, blue, 9 mm, 6 m with quick coupling, red and nipple

SATA BVD SATA BVD conversion kit with QCC without fine thread

Pressure measuring devices SATA adam 2 U (air micrometer with adam 2 display psi)

LCS - the Liner LCS 0.65 l - the Liner - 125 µm flat sieve pack of 50 pieces

Cleaning brush, large (packing unit 5 pieces) for spray guns

Gravity flow cup Reusable aluminium cup, 1.0 l with QCC without fine thread for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B

Multi‑purpose cup system LCS 0.40 l 125 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

LCS - the Liner Multi‑purpose cup system LCS 0.40 l 125 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Multi‑purpose cup system LCS 0.65 l 200 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

LCS - the Liner Multi‑purpose cup system LCS 0.65 l 200 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Triple spray gun holder for wall mounting

SATA air hose, blue, 9 mm, 7.5 m with quick coupling, red and nipple

Spray gun holder with strainer holder

Cleaning brush double-sided silicone-free

SATAclean wet holding tray for 3 spray guns

SATA viscosity cup 4.0 mm, flow time tolerance < 1 sec.

Accessories for spray guns SATA case, silver (50 x 35 x 20) with trolley function, without print, incl. inserts for 4 spray guns; material: aluminium

Accessories for spray guns SATA case, black (63 x 50 x 30 cm) with trolley function, without print, incl. individual insert; Material: plastic

Reusable aluminium cup, 0.15 l with QCC without fine thread for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B, jet RP, minijet 4400 B

Gravity flow cup Reusable aluminium cup, 0.15 l with QCC without fine thread for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B, jet RP, minijet 4400 B

Pressure measuring devices SATA air micrometer 0-845, 1/4" (male thread) and G 1/4" (female thread)

"SATA quick coupling nipple G 1/4"" (female thread) (pack of 2 pieces)"

Multi‑purpose cup system LCS 0.85 l 125 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

LCS - the Liner Multi‑purpose cup system LCS 0.85 l 125 µm flat sieve QCC VPE: 50 pieces For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Cleaning brush (packing unit 1 piece)

SATA agitator cup SATA agitator cup, conversion kit for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B, jet RP

Multi‑purpose cup system RPS 0.3 l 125 µm flat sieve QCC Megapack VPE 100 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

RPS - the Original Multi‑purpose cup system RPS 0.3 l 125 µm flat sieve QCC Megapack VPE 100 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Multi‑purpose cup system RPS 0.6 l 125 µm flat sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

RPS - the Original Multi‑purpose cup system RPS 0.6 l 125 µm flat sieve QCC VPE 50 For mixing, spraying, reusing and storing water‑ and solvent‑based coating systems

Accessories for spray guns SATA case, silver (45 x 33 x 15 cm), without print, incl. inserts for 5 spray guns; material: aluminium

SATA nozzle cleaning needles (pack of 12 pieces)

Spare Parts

Air micrometer for SATAjet 3000 K, SATAjet 1000, SATAjet 100

Trigger kit for SATAjet 1000, jet 100

Sealing ring for air cap ring SATAjet 100 and 1000

Sealing kit SATAjet 1000 B, 100 B

Tool kit for SATAjet 3000, SATAjet 1000, SATAjet 100

Spare parts for Spray Guns Nozzle set SATAjet 100 B F RP 1.4

Air connection piece 1/4" male thread for SATAjet 1000, jet 100, minijet, SATAjet B/GR/H, spray master

Air distribution ring (packing unit 3 pieces) for SATAjet 1000 B, jet 100 B

Control knob with screw for SATAjet 1000, jet 100

Paint strainer, 300 µm (packing unit 10 pieces) for SATA spray guns except for SATAminijet 3000 B

Maintenance kit SATAjet 1000, jet 100

Spare parts for Spray Guns Nozzle set SATAjet 100 B F RP 1.1 UV

Material flow control with counter nut for SATAjet 1000, jet 100

Air piston head (packing unit 3 pieces) for SATA spray guns except for SATAminijet

CCS Clips, green, blue, red, black (packing unit 4 pieces) for SATAjet 3000 B, jet 1000 B, jet 100 B, SATAminijet 3000 B

Seal retainer, cpl. for SATAjet 5000, jet 4000, jet 3000, jet 2000, jet RP, jet 1000, jet 100

Sealing (packing unit 3 pieces) for spindle for SATA spray guns except for SATAminijet

Anti-drip device (packing unit 4 pieces) for 0.6 l reusable plastic cup

Spare parts for Spray Guns Nozzle set SATAjet 100 B F RP 2.0

Gravity flow cup Reusable plastic cup, 0.6 l with QCC without fine thread for SATAjet 5000 series, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B, jet RP, minijet 4400 B

Spare parts for Spray Guns Nozzle set SATAjet 100 B F RP 1.6

Trigger sleeve kit for SATAjet 100, 1000, 2000, 3000 series

Spare parts for Spray Guns Nozzle set SATAjet 100 B F RP 1.8

Paint strainer, 300 µm (packing unit 100 pieces) for SATA spray guns except for SATAminijet 3000 B

Paint needle packing for SATAjet X5500, jet 5000, jet 4000, jet 3000, jet 2000, jet RP, jet 3000 K, jet 1000, jet 100, KLC

Adjustment screw (packing unit 3 pieces) for air micrometer for SATA spray guns except for SATAminijet and SATAjet 5000 B

Spare parts for Spray Guns Nozzle set SATA jet 100 B F RP Sealer

Pressure spring (3 pieces) for paint needle and air piston for SATA spray guns except for SATAminijet

Paint strainer, 300 µm (packing unit 500 pieces) for SATA spray guns except for SATAminijet 3000 B

Sealing element (packing unit 5 pieces) for fluid tip SATAjet X 5500, jet 5000 B, jet 4000 B, jet 1000 B, jet 100 B

Air piston service unit for SATAjet 3000 K

Swivel joint for SATAjet 4000 DIGITAL, jet 3000 DIGITAL, spray master, jet B/ GR, jet 2000, jet RP

O-ring for SATA mini-WA and SATAjet 3000 K spray mix

Screw-on lid for 0.6 l PVC cup with drip-catching ring and non-drip device

Universal spanner (pack of 3 pieces)

Premium filler spray gun for automotive refinishing SATAjet 100 B F RP 1.8 RPS suitable for water- and solvent-based primers and fillers

Accessories

Spare Parts

Which nozzle technology is right for me?

RP – the Extra-Fast

HVLP – the Extra-Efficient