Product number:
73734
SATA spray master RP, 1.7 mm, 0.7 l pressurised cup, reduct. valve
Highlights
- Allround talent: With the pressurised cup and the wide horn nozzle set, practically any material can be perfectly processed in carpentry and painting.
- Fine atomisation: the optimised internal nozzle pressure ensures perfect results
- High efficiency: the transfer rates are significantly higher than the 65% required by the VOC legislation
- Low air consumption - therefore also suitable for small compressors
- With the nozzle size "SM" (approx. 1.3) this gun can be used for almost any spray material - only the pressure in the cup has to be adjusted according to the viscosity.
Nozzle recommendation (optional)
Please select the paint manufacturer used and the material to receive a suitable nozzle recommendation:
The SATA spray master RP combines low overspray, high pressure technology with the advantageous properties of a material pressure supported spray gun. With this unique combination, almost all paint systems of different viscosities up to thick-film glazes can be processed with excellent painting results.
- Air connection thread 1/4" (male thread)
- Air connection thread without swivel joint
- Air consumption 230 l/min 8.12 CFM
- Air inlet pressure field of application 1 - 2 bar 0.07 - 0.14 psi
- Max. storage temperature 60 °C 140 °F
- Min. storage temperature -20 °C -4 °F
- Nozzle Size 1,7
- Nozzle Technology RP
- Nozzle type W
- Recommended dynamic inlet air pressure (compliant / HVLP) 2 bar 0.14 psi
- Recommended spraying distance 17 - 21 cm 6.69 - 8.27 in
- Spraygun Cup System Druckbecher BVD 0,7 l
-
* All information is provided without guarantee - errors and changes reserved.
** All information refers to the entire product range and not to individual variants.
Cleaning brush (packing unit 10 pieces) for spray guns
$48.42
Product in stock
Pressure measuring devices
SATA air micrometer 0-845, 1/4" (male thread) and G 1/4" (female thread)
$97.38
Product in stock
Pressure measuring devices
SATA adam 2 >psi< for SATA spray guns except for SATAminijet and SATAjet 5000 series
Variants from
$30.69
$390.65
Product in stock
Cleaning brush (packing unit 1 piece)
$29.12
Product in stock
SATA cleaning kit with 2 cleaning brushes, medium and 12 nozzle cleaning needles
$71.28
Product in stock
SATA viscosity cup 4.0 mm, flow time tolerance < 1 sec.
$235.49
Product in stock
Cleaning brush, large (packing unit 5 pieces) for spray guns
$41.54
Product in stock
SATA Spray Gun Holder
$121.77
Product in stock
SATA air hose, blue, 9 mm, 15 m with quick coupling, red and nipple
$457.02
Product in stock
SATA viscosity cup 4.0 mm, flow time tolerance < 1.5 sec.
$110.66
Product in stock
SATAclean wet holding tray for 3 spray guns
$859.23
Product in stock
Spray bottle 1.0 l
$17.96
Product in stock
SATA quick coupling nipple G 1/4" (female thread) (pack of 2 pieces)
$28.76
Product in stock
Flexible quick coupling nipple G 1/4" (female thread)
$133.25
Product in stock
SATA air hose, blue, 9mm, 10 m with quick coupling, red and nipple
$306.41
Product in stock
SATA nozzle cleaning needles (pack of 36 pieces, packed to 12 pieces each)
$71.28
Product in stock
Pressure measuring devices
SATA adam 2 U (air micrometer with adam 2 display psi)
Variants from
$30.69
$500.94
Product in stock
Pressure measuring devices
SATA air micrometer with gauge, 1/4" (male thread) and G 1/4" (female thread)
Variants from
$97.38
$149.67
Product in stock
SATA cert, with archive, spray pattern block, single sheet holder and distance marker
$341.91
Product in stock
SATA quick coupling nipple G 1/4" (female thread) (packing unit 5 pieces)
$63.59
Product in stock
SATA air hose, blue, 9 mm, 7.5 m with quick coupling, red and nipple
$256.19
Product in stock
SATA gravity gun holder for gravity cup spray guns
$61.79
Product in stock
Pump-spray cleaning bottle, not suitable for thinner
$104.45
Product in stock
Spray Gun Display Plinth
$39.00
Product in stock
SATA dosenboy, to cut out can lids from cans up to 36 cm height
$594.68
Product in stock
SATA universal spray gun and hose holder for all SATA spray guns
$133.88
Product in stock
SATA high performance grease, silicone- and acid-free, 100 ml for spray guns
$39.02
Product in stock
Cleaning brush, double-sided (pack of 10 pieces) for spray guns
$71.28
Product in stock
Repair kit SATAjet H/K/spray master as of spray gun serial no. 90000
$283.91
Product in stock
Air hose cpl. w. pressurized cup connection, for SATA Spray-Master
$148.55
Product in stock
Trigger sleeve kit for SATAjet 100, 1000, 2000, 3000 series
$47.52
Product in stock
Paint needle packing for SATAjet B, jet GR, jet H, spray master, jet NR 95, jet K
$43.34
Product in stock
Aluminium lid, cpl. for SATA BVD
$194.67
Product in stock
Gasket for air piston LM, SATAjet, MC-B and MR/D/90
$7.25
Product in stock
Sealing kit SATAjet/B and KL
$48.83
Product in stock
Plastic air hose for BVD and agitator cup
$20.52
Product in stock
Air piston head (packing unit 3 pieces) for SATA spray guns except for SATAminijet
$23.45
Product in stock
Sealing (packing unit 3 pieces) for spindle for SATA spray guns except for SATAminijet
$14.00
Product in stock
Sealing ring (packing unit 4 pieces) for SATA BVD, HRS-E, mini set 2
$27.99
Product in stock
Control knob for SATAjet B/GR/H/spray master RP, jet 2000, jet RP and regulation valve
$55.13
Product in stock
Stuffing box for air piston SATAjet, KL, HKD and MC-B
$25.34
Product in stock
Trigger kit for SATAjet B/ GR, spray master, KLC
$56.66
Product in stock
Control fittings, complete, for BVD pressurized cup connection kit (GR and LM)
$485.01
Product in stock
Anti-drip device (packing unit 10 pieces) for SATA spray master
$35.55
Product in stock
Which nozzle technology is right for me?
RP – the Extra-Fast
The optimized high-pressure technology enables maximum working speed with VOC-compliant transfer rates and flexible handling.
HVLP – the Extra-Efficient
Thanks to low-pressure technology, HVLP nozzle systems achieve particularly high transfer rates.
