Product number:
141218
SATA filter 284 triple-stage sintered filter/fine filter/activated charcoal filter, pressure regulator, outlet module (2x air coupling/nipple 9 mm)
Highlights
- Excellent compressed air quality - removes oil, water and particles
- User-friendly and easy to maintain
- Activated charcoal cartridge (third filter stage) removes oil vapours from the breathing air
- 2,000 Nl/min air flow - sufficient air volume to supply two spray guns simultaneously with both clean spraying air and breathing air
- Air inlet: G 1/2" female thread; Air outlet: 1/4" male thread
Nozzle recommendation (optional)
Please select the paint manufacturer used and the material to receive a suitable nozzle recommendation:
Economical combi fine filter unit for highest air quality requirements in paint application as well as for air-supplied breathing systems. For installation in spray booths, prep decks and other workshop areas.
- Installation variation standard wall mounting
- Max. air flow 2000 Nl/min
- Max. air outlet pressure 10,0 bar
- Max. inlet air pressure 10,0 bar
- Max. storage temperature 60 °C 140 °F
- Min. storage temperature -20 °C -4 °F
- Number of filter stages 3
- Suitability for breathing protection Yes
- Suitability for water-based systems Yes
- Thread connection inlet side G 1/2" (female thread)
- Thread connection outlet side G 1/4" (female thread)
-
* All information is provided without guarantee - errors and changes reserved.
** All information refers to the entire product range and not to individual variants.
Pressure measuring devices
Pressure gauge 0 – 10 bar, 50 mm for SATA filter series 200, 300 and 400, 2K mix
Which nozzle technology is right for me?
RP – the Extra-Fast
The optimized high-pressure technology enables maximum working speed with VOC-compliant transfer rates and flexible handling.
HVLP – the Extra-Efficient
Thanks to low-pressure technology, HVLP nozzle systems achieve particularly high transfer rates.
