Under the “Contact” menu item, you will find our contact form, as well as our contact details so you can reach us by phone.

Get in touch

You can reach us quickly and easily via our contact form under the "Contact" menu item. The responsible sales representative will contact you as soon as possible.

To the contact form

You can find all official importers and contact persons in other countries under the "Service - Distribution partner search" menu item.

Distribution partner search

The company's current name, SATA GmbH & Co. KG with the brand name SATA was entered as a trademark as early as 1914. The name came from two syllables in the name of the founding company SANITARIA, which produced medical devices.

The route map to SATA's company headquarters in Kornwestheim near Stuttgart can be found under the "Contact" menu item.

To the contact form

You can find comprehensive information about SATA's history as a company steeped in tradition, as well as the history of its products, under the "About us" menu item.

To the SATA-History

We currently supply over 100 countries all over the world from our only production site in Kornwestheim near Stuttgart.

You can find videos about the proper cleanings of spray guns in the "Technical knowledge" category. You can also find regular tips on our social media channels.

To the videos

If the spray gun is soaked in solvent, dirt particles and paint residue will dissolve, but they can also get into the air channels of the spray gun. Since the air channels are very fine boreholes, these particles will gradually clog the air channels over time. Since this is a slow process, the spray gun operator will usually not notice this clogging immediately: the painting result will gradually deteriorate until it suffers considerably (colour shifts, particle confinements, reduction of the spray jet). The causes of this error are often sought in the varnish itself, the pressure supply or something similar and only rarely in the faulty handling of the spray gun. 

We recommend that you clean the spray gun carefully and thoroughly, either manually or with an automatic washing machine (with a blowing device for the air channels) but never place it in a dilutant or paint stripper.

Yes, the SATA spray guns from the current production run are suitable for use with water-based varnish without restriction. Specially designed automatic and robot spray guns are available for continuous industrial use. We also carry nozzles that are specially designed for water-based varnishes. When using solvent-based and water-dilutable paints, we recommend that you use separate spray guns in order to avoid painting errors and expensive refinishing!

Yes, the latest mist-reduced and VOC-compliant spray guns in HVLP low-pressure technology or optimised RP high-pressure technology offer the finest atomisation results for top varnishing quality. With material transfer rates of over 65 %, they also ensure significant material savings and improved environmental compatibility.

Yes, in order to be able to offer the absolutely best spraying quality, SATA's experienced technical staff uses an extensive manual process to fine-tune all nozzle sets and spray guns without exception. For a vertical/standing spray pattern, the air nozzle is to be aligned in such a way that the laser marking is legible from the front. For a horizontally/reclining spray pattern, the individual test mark of the adjusting technician, which is attached to a flange side of the air nozzle, must be aligned so that it faces upwards..

Spray guns, compressed air filters and ventilated breathing protection systems for the SATA Premium Warranty can be registered for up to 30 days after purchase under the "Product Service - Premium Warranty Registration" menu item. You will immediately receive an e-mail to confirm your warranty extension.

To the SATA Premium Warranty Registration

The SATA SAL system is an intelligent and absolutely secure system to authenticate the authenticity of our products. You can find out whether a product came from our production line within seconds. All you need to do is enter the SAL code online under the "Product Service - SATA Product Authentication" menu item.

To the SATA product authentication

Of course. Our in-house service and repair department will make sure that your SATA product is repaired quickly and cost-effectively even after the expiration of the 3-year warranty period (up to 30 days after purchase if you've registered for the free SATA Premium Guarantee). Our supply of spare parts lasting many years after the purchase of the products is exemplary in the industry and of course we will gladly provide a cost estimate free of charge.

Yes of course. Please contact us via our contact form and select "SATA coins & more" as the topic. A member of our staff will process your request as soon as possible.

To the contact form

Please select the respective topic under the "Contact" menu item and describe your question or concern. A member of our staff will contact you immediately.

To the contact form

In the Custom Design Gun configurator, you can design your own individual spray gun and add your own colours, pictures and texts.

To the configurator

We have compiled a large selection of brochures, catalogues, operating manuals and much more for you. You can find them in the "Service - Downloads" menu item.

To the downloads