First steps ...

Putting your spray gun in operation

  • Clean compressed air

  • Sufficient air volume

  • Compressed air micrometer

  • Correct adjustment of the Dynamic Inlet PressureThe inlet pressure on the spray gun should always be correctly adjusted. This is particularly easy with the DIGITAL technology of the SATAjet 5000 DIGITAL or with the retrofit SATA adam 2. It is also possible, however, to connect a standard air micrometer with manometer to the gun. Since pressure in combination with the supply of compressed air (air consumption) has a great influence on optimum results, you should always ensure to set the inlet pressure as recommended. You will find information on the correct pressure to be used in the paint application sheet of the paint manufacturers or on the web pages reserved for each individual SATA spray gun.X»-> Gun-Inlet PressureX»

  • Material flow control

  • Fan control adjustment

  • Nozzle set

  • Distance to target

Details concerning these points...

 

© 2002-2017 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany. All photos, logos and text contained on this web site are the property of SATA GmbH & Co. KG. Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.