SATA - competence in cavity preservation and underbody protection

Read more

 
 
 

Cavity Preservation

 
 
 

SATA® HRS™

Pressurised cup spray gun for the application of cavity preservation material

with 1.0 l pressurised cup (max. 10 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X»).

SATA® HRS™ E

Spray gun for the application of cavity preservation material directly from disposable containers

with 1.5 l pressurised cup (max. 10 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X») and material flow control

 
 
 

Barrel pump systems for cavity preservation

 
 
 

SATA® HKU™

Barrel pump system for the application of cavity preservation material

consisting of piston pump 1:3 with hose pair 10 m, SATAjet 1000 KK RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» spray gun, nylon-, door and hood wand

 
 
 

Underbody protection

 
 
 

SATA® UBE™

Suction spray gun for the application of underbody protection material from disposable containers

In a sturdy metal design.

 
 
 

Barrel pump system for underbody protection

 
 
 

SATA® UBS™

Barrel pump system for the application of underbody protection material,

consisting of piston pump 22:1, hose pair 10 m, SATAjet 3000 K spray mix spray gun with nozzle 3350, for 60/200 l Barrel.