SATAgraph™ 1
Starter model as gravity flow cup version
- Double action system: completely seperate air and material control by the trigger
- Easy handling
- Detachable, screwed cup to apply very small quantities
- Optional als Hängebecher-Pistole lieferbar
- Delivery in the aluminium case
| Air consumption: | 10 Nl/min (0,4 cfm) |
| Recommended Inlet PressureThe inlet pressure on the spray gun should always be correctly adjusted. This is particularly easy with the DIGITAL technology of the SATAjet 5000 DIGITAL or with the retrofit SATA adam 2. It is also possible, however, to connect a standard air micrometer with manometer to the gun. Since pressure in combination with the supply of compressed air (air consumption) has a great influence on optimum results, you should always ensure to set the inlet pressure as recommended. You will find information on the correct pressure to be used in the paint application sheet of the paint manufacturers or on the web pages reserved for each individual SATA spray gun.X»: | 1,0 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X» (15 psi) |
| Maximum operating temperature: | 50°C |
| Maximum operating overpressure: | 4 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X» (58 psi) |
| Weight: | 94 g |
| Air inlet: | Mini quick coupling |
| Size: | 0,25 - 0,45 |
SATAgraph 1 nozzle 0,25, gravity flow cup 2,5 ml, without PVC hose Art. No 134544 |
SATAgraph 1 nozzle 0,25, suction cup 5 ml, without PVC hose Art. No. 139568 |
SATAgraph 1 nozzle 0,45, gravity flow cup 5 ml, without PVC hose Art. No. 141408 |
Nozzle set 0,25 SATAgraph 1 Art. No. 134619 |
Nozzle sert 0,45 SATAgraph 1 Art. No. 134635 |