SATAjet® 3000 K HVLP

Pressure fed high performance gun

Perfect for applying large quantities of paint for any job requiring the best finishes like car refinishing or airplane construction


  • Highest profitability - SATA® HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» technology ensures transfer efficiencies considerably above 65 % required by VOCVOC means Volatile Organic Compounds; i.e. organic solvents.These solvents like many other substances trigger the formation of ground level ozone in combination with solar radiation.VOC guidelines established by the European Community (EU) are intended to contribute to reducing solvent emissions. These guidelines will be valid beginning November 1, 2004 for new shops and November 1, 2007 for all companies. Meanwhile, the VOC Guidelines have been incorporated into national law in most EU member states.X» legislation. As a result, this pressure-fed high performance gun not only helps protect the environment, but also saves lots of expensive paint (approx. 30 % compared to a conventional high pressure gun).

  • Finest atomization and a top-class finish are ensured by the high air volume. The slight additional cost for compressed air (compared to a conventional high pressure gun) are considerably exceeded by material savings. Even with the latest generation of High Solid materials, excellent atomization quality is achieved.

  • The patented air circulation principle provides an especially homogeneous and soft fan.

  • The large fan and high material flow rates ensure swift work .

  • 100 % hand checked nozzle sets ensure the constantly high, well-known SATA quality - for complete guns as well as spare nozzle sets.

  • The durable air caps are made of brass (not of aluminium), therefore ensuring a long life time - a factor particularly important for industrial use.

  • Nozzle sets ranging from 0.8 to 2.0 mean a wide field of application.

  • Rapid air cap change with the SATA Quick Change System™ (only 1.5 turns) - ideal for continuous coating.

  • The gun can be adapted without greater effort to existing work stations.

  • Excellent handling - the short gun body,  extremely low weight and
    the optimum balance ensure the gun "fits like a glove".

  • Suitable for water-borne materials - paint needle and nozzle are made of stainless steel, and the nickel-plated gun body has been refined with a
    special coating.

  • To make guns different from one another (i.e. guns for basecoat and guns for clearcoat), the gun can be marked by means of a coloured plastic disc (Colour Code System).

  • Self-adjusting air and material packings with long life considerably
    reduce servicing efforts.

  • The carefully polished nickel-plated gun surface and the Quick Change System reduce cleaning efforts as well.

  • Naturally, the gun is equipped with a material flow control, a round / flat spray control and an air micrometer.

  • Please also see our complete line of material feed systems, such as paint pressure tanks, diaphragm and piston pumps.

Optional:

  • Please take a look at our useful accessories for this gun !