SATA® air star C™
the professional air supplied breathing half mask
Comfortable respirator half mask for permanent use
- Air supplied half mask for painters
- Optimum health protection due to the supply of clean breathing air
- Excellent fit for any type of facial contours
- Very light and comfortable
- Suitable for workers who wear glasses
- Innovative 4-point headband for more wearing comfort
- No build-up of heat and moisture in the mask
| Air consumption: | 150 Nl/min (5,3 cfm) |
| Recommended Inlet PressureThe inlet pressure on the spray gun should always be correctly adjusted. This is particularly easy with the DIGITAL technology of the SATAjet 5000 DIGITAL or with the retrofit SATA adam 2. It is also possible, however, to connect a standard air micrometer with manometer to the gun. Since pressure in combination with the supply of compressed air (air consumption) has a great influence on optimum results, you should always ensure to set the inlet pressure as recommended. You will find information on the correct pressure to be used in the paint application sheet of the paint manufacturers or on the web pages reserved for each individual SATA spray gun.X»: | 4 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X» (58 psi) |
| Maximum operating overpressure: | 4 barThis is the physical unit used for the measurement of pressure in Europe. Material and air pressure are indicated in bar (1 bar = approx. 14.5 psi).X» (58 psi) |
Maximum volume flow: 305 Nl/min
SATA air star C respirator set with activated charcoal adsorber, disposable hood Art. No. 137554 |
SATA air star C half mask with breathing hose and industry belt unit Art. No. 137562 |
SATA air star C half mask and belt unit with T-piece Art. No. 137570 |
SATA air star C half mask with breathing hose Art. No. 137588 |