SATA News


20.11.13 SATAminijet 4400 B

The new compact spray gun SATAminijet 4400 B for small areas is now replacing its extremely successful predecessor SATAminijet 3000 B. Besides a complete redesign, this new spray gun model also features a host of very practical...[more]


16.08.13 Tips on how to select the correct air hoses

More often than you might think, the air hose is actually the reason for coating flaws. To prevent problems like orange peel, colour shade deviations or mottling, you should only use a high-quality air hoses with correct inner...[more]


16.08.13 "Good is not good enough, it has to be perfect!"

25 years ago, Klaus Kübler was on the verge of giving up. The task at hand seemed to be simple yet unachievable at the same time. It felt like he was already making attempt number 499 to draw his perfect sphere. His former...[more]


16.08.13 The SATAjet 1000 B LIGNUM reaches out to carpenters and woodfinishers

"Finally, there is a spray gun available which directly reaches out to carpenters and woodfinishing people!" This is the reaction of Gabriela Lippok-Zöllner, branch manager of Prosol Darmstadt, Germany and Marco Nowak, sales...[more]


16.08.13 NEW: SATA adamAll spray guns carrying this logo can be retrofitted with a SATA adam to upgrade them with a DIGITAL gauge. This encompasses all guns featuring an integrated standard air micrometer: SATAjet 3000 B and KSATAjet 2000 HVLPSATAjet RPSATAjet 1000 B, H and KSATA LM 2000 B, H and KSATAjet 100 BSATA KLCSATAjet B and GRSATAminijet 3 and 4 (only with SATA adam mini)X» 2 U

The accurate and correct setting of the gun Inlet PressureThe inlet pressure on the spray gun should always be correctly adjusted. This is particularly easy with the DIGITAL technology of the SATAjet 5000 DIGITAL or with the retrofit SATA adam 2. It is also possible, however, to connect a standard air micrometer with manometer to the gun. Since pressure in combination with the supply of compressed air (air consumption) has a great influence on optimum results, you should always ensure to set the inlet pressure as recommended. You will find information on the correct pressure to be used in the paint application sheet of the paint manufacturers or on the web pages reserved for each individual SATA spray gun.X» is one of the key requirements to ensure perfect colour match during the painting process. Whether the pressure is set too low or too high, colour deviations will be the...[more]


Displaying results ###SPAN_BEGIN###%s to %s out of ###SPAN_BEGIN###%s
 
 
 
 

Register now for the SATA eMail newsletter - and we will keep you up to date.