SATAjet® 100 B F HVLP

Low overspray primer and filler gun

This paint spray gun offers extra high savings by reducing car refinish sanding to a minimum


  • Highest economic efficiency – SATA’s HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» technology guarantees Transfer Efficiency-> transfer rate  X» rates significantly above the required 65% by VOCVOC means Volatile Organic Compounds; i.e. organic solvents.These solvents like many other substances trigger the formation of ground level ozone in combination with solar radiation.VOC guidelines established by the European Community (EU) are intended to contribute to reducing solvent emissions. These guidelines will be valid beginning November 1, 2004 for new shops and November 1, 2007 for all companies. Meanwhile, the VOC Guidelines have been incorporated into national law in most EU member states.X» legislation.  This spray gun for filler and primer is not only environmentally friendly but it also saves a lot of material.

  • Ergonomically optimised spray gun body in state-of-the-art design with small dimensions and low weight for fatigue-free working

  • Nozzles sizes 1.4, 1.7, 1.9 and 2.1 for primer and filler work

  • 100% hand checked nozzle sets ensure the constant high SATA quality – for complete guns as well as spare nozzle sets

  • Smoothly polished gun surface for easy and quick cleaning including material pas-sages

  • Now with material-flow control with counter nut and enhanced thread, as with the top coat spray guns

  • Air micrometer with graduations to adjust atomisation air

  • Suitable for Waterborne PaintsIt goes without saying that you can apply any waterborne paint with a SATA paint spray gun. There is only one limitation in this respect: Please do not use the same spray guns for the application of solvent-based as well as waterborne paints. We recommend working with two completely separate sets of spray guns, in line with the two separate paint systems.The CCS (Color Code System) which comes with each high-performance spray gun offers a clever solution to assist you in clearly marking your different spray guns. X» - paint needle and nozzle are made of stainless steel and the spray gun body has been carefully anodize

  • Self-adjusting air and material packings with a long lifetime significantly reduce the need for servicing

  • Comfortable trigger with low trigger-pull resistance and integrated paint needle cover, minimising cleaning effort and increasing the life time of the needle packing 

  • CCSSATA Colour Code System – allowing easy identification of the spray gun. For example, your spray gun for waterborne paints could be marked with a blue chip and your clear coat gun with a black chip or one particular colour could be assigned to each individual painter.X»-Clip (Colour Code System) to mark each spray gun individually

  • Single-handed round/flat control to adjust the spray pattern to the object which is to be painted

  • QCCThe patented quick cup change connection Quick Cup Connector (US.Pat. 6,877,677) guarantees that the gravity flow cup can be firmly fixed to the spray gun with a ¼ turn only, thus significantly facilitating cleaning and exchange of the cup. X» quick cup connector for quick cup changes and fast cleaning

Optional:

  • Swivel joint – keeps hoses from twisting and relieves the wrists while painting.