Yacht and Boat Building

The Complete Programme for Yacht and Boat Building

Usually, yachts and small boats are built either made to order or in small series productions. Their surfaces, however, must meet a number of different requirements in terms of functionality and optics. Consequently, a host of materials are being applied during the manufacturing process. For each application requirement, SATA offer a suitable spray gun solution ensuring perfect finishes.

 
 
 

Top coat spray guns for perfect high gloss finishes

 

SATA spray guns enable every user to meet the demands in terms of brilliance, colour effects, distribution, gloss level and reproducibility. Applying modern paint systems achieves exactly the finish your demanding yacht and boat building customers require.

Spray guns for large surfaces

 
 
 

SATAjet® 5000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

As versatile as you

The "Super Saver" SATAjet 5000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» achieves particularly high transfer rates,
due to its low pressure technology.

SATAjet® 5000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

As versatile as you

The "Super Speed" SATAjet 5000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» with its optimised high pressure technology
for maximum application speed and minimum overspray.

SATAjet® 4000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

The Experience in Form and Function

The "Super Saver" SATAjet® 4000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» achieves particularly
high Transfer Efficiency-> transfer rate  X» rates, due to its low pressure technology.

SATAjet® 4000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

The Experience in Form and Function

The "Super Speed" SATAjet® 4000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»® with its optimised high pressure
technology stands for maximum application speed and low overspray.
 
 
 

All round spray gun for virtually all sprayable materials

 

High-quality wood is the most frequently used material for interior and outdoor areas in the boat building sector. Due to its comprehensive range of nozzle sizes and versatile accessories such as pressurised and agitator cups (see on the right side), the SATAjet 1000 B LIGNUM* is perfectly suitable for the application of a large spectrum of different spray materials: from low-ViscosityMaterial viscosity is the time (in seconds) it takes the material to completely flow out of a standardized container. There are different measuring methods available. Please find the corresponding chart attached. X» wood stains, clear coats and glazes to glues and other thixotropic materials. With the available extensions, even areas of difficult access can be perfectly coated.

 
 
 

SATAjet® 1000 B™ HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» LIGNUM

The robust and easy to clean universal spray gun

Excellent for all common applications in the woodfinishing industry -
in special wood optics.

SATAjet® 1000 B™ RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» LIGNUM

The robust and easy to clean universal spray gun

Excellent for all common applications in the woodfinishing industry -
in special wood optics.
 
 
 

Material fed spray guns

 

The small and lightweight SATAjet 1000 K supplied from pressure pots or double diaphragm pumps is a multi purpose spray gun. Due to its large range of available nozzle sizes, this pressure fed spray gun is perfectly suitable for the application of various materials: from thin wood stain, clearcoat, textured paint and glaze to glue and other thixotropic materials. Extensions which are available in various versions and sizes allow perfect coating of areas difficult to access.

 
 
 

SATAjet® 1000 K HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

The all round spray gun

Perfect finishes in all fields of application with material supply from pressure
tanks or via double diaphragm pumps.

SATAjet® 1000 K RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

The all round spray gun

Perfect finishes in all fields of application with material supply from pressure tanks
or via double diaphragm pumps.

 

 

SATAjet® 1000 H RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

The suction cup version

With 1 l aluminium suction cup and easy material refill due to quick release
fastener on the cup.

SATA® spray master™ RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

The all round spray gun for the woodfinishing industry

Specialist for high ViscosityMaterial viscosity is the time (in seconds) it takes the material to completely flow out of a standardized container. There are different measuring methods available. Please find the corresponding chart attached. X» materials: Ideal for small surfaces
in the woodfinishing industry.
 
 
 

Spot Repair and blending

 

Compact spray gun for smaller surfaces in areas of difficult access. Due to special SR nozzles (Spot Repair), this spray gun is perfectly suitable for spot repairs on vehicles. Fatigue-free working due to optimum ergonomics and low weight. Suitable for all modern paint systems - including Waterborne PaintsIt goes without saying that you can apply any waterborne paint with a SATA paint spray gun. There is only one limitation in this respect: Please do not use the same spray guns for the application of solvent-based as well as waterborne paints. We recommend working with two completely separate sets of spray guns, in line with the two separate paint systems.The CCS (Color Code System) which comes with each high-performance spray gun offers a clever solution to assist you in clearly marking your different spray guns. X». Available in HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» or optimised high pressure technology RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X».

 
 
 

SATAminijet® 4400 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

Brilliance in Miniature

The "Super Saver" SATAminijet 4400 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» achieves particularly
high Transfer Efficiency-> transfer rate  X» rates, due to its low pressure technology.

SATAminijet® 4400 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

Brilliance in Miniature

The "Super Speed" SATAminijet 4400 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» with its optimised high
pressure technology stands for maximum application speed.
 
 
 

Disposable PVC cups

 

SATA RPSRPS = Rapid Preparation System - One-way cup system for the efficient application of paint. It is the ideal system for mixing, painting, refilling and storing of left-over paint.The SATA RPS is available in 0.3 l, 0.6l and 0.9l cup sizes and fits on the following spray gun models without adapter:
SATAjet 4000 BSATAjet 3000 BSATAjet 1000 BSATAjet 100 BSATAjet 2000 HVLP (2. Gen.)SATAjet RPSATAminijet 3000 B HVLP (with SATA RPS 0.3 l “minijet”)X» (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability. It makes a painter's life much easier, considerably increases productivity and drastically reduces the consumption of cleaning solutions and solvents.
 
 
 

SATA® RPSRPS = Rapid Preparation System - One-way cup system for the efficient application of paint. It is the ideal system for mixing, painting, refilling and storing of left-over paint.The SATA RPS is available in 0.3 l, 0.6l and 0.9l cup sizes and fits on the following spray gun models without adapter:
SATAjet 4000 BSATAjet 3000 BSATAjet 1000 BSATAjet 100 BSATAjet 2000 HVLP (2. Gen.)SATAjet RPSATAminijet 3000 B HVLP (with SATA RPS 0.3 l “minijet”)X»®

The disposable cup system for mixing and painting

Quick and safe colour changes when using disposable cups such as SATA RPSRPS = Rapid Preparation System - One-way cup system for the efficient application of paint. It is the ideal system for mixing, painting, refilling and storing of left-over paint.The SATA RPS is available in 0.3 l, 0.6l and 0.9l cup sizes and fits on the following spray gun models without adapter:
SATAjet 4000 BSATAjet 3000 BSATAjet 1000 BSATAjet 100 BSATAjet 2000 HVLP (2. Gen.)SATAjet RPSATAminijet 3000 B HVLP (with SATA RPS 0.3 l “minijet”)X».
 
 
 

Breathing Protection

 

SATA breathing protection equipment - whether it be full face respirator or half mask - provides maximum protection, enhanced lifetime and increased wearer comfort to preserve your health without restricting your mobility, thus ensuring perfect results.

 
 
 

Full face respirator hoods

 

SATA® air vision™ 5000

Comfortable full face respirator hood

Maximum health protection, for continuous use.

SATA® vision™ 2000

Comfortable full face respirator hood

Maximum health protection, for continuous use.

Half masks

SATA® air star® C

The comfortable half mask

Ideal for medium to long application intervals.

SATA® air star F™

The comfortable filter half mask

Perfectly suitable for short-time paint jobs and preparation work.
(Areas of application subject to national legislation)
 
 
 

Air Filtration

 

Every bodyshop requires compressed air for many different applications, such as for painting, operation of paint pressure tanks, material pumps, blow guns, cleaning devices and/or supplied-air respirator systems. According to the field of application, there are different requirements concerning air purification: In all cases, SATA offer the appropriate solution.

 
 
 

Modular filter series for the spray booth

SATA® filter 484®

Triple-stage combi filter sintered filter / fine filter / activated charcoal
with pressure regulator and outlet module

Compressed air filter for the spray booth (1/4“ male thread).

SATA® filter 444®

Double-stage combi filter sintered filter / fine filter with pressure regulator
and outlet module 

Compressed air filter for the spray booth (1/4“ male thread).

SATA filter® 424™

Single-stage sintered filter with pressure regulator and outlet module

Compressed air filter for the spray booth (1/4“ male thread).

SATA® filter 464®

Single-stage activated charcoal filter to retrofit the SATA filter 444

Compressed air filter for the spray booth (1/4“ male thread).

 

Air filtration in the preparation area

SATA® filter 103 prep™

Triple-stage filter for the application of solvent-based or waterborne primer
and prep materials

Low maintenance compressed air filter for the preparation area (1/4“ male thread).

SATA® filter 100 prep™

Double-stage filter without activated charcoal -
suitable for solvent-based prep materials

Low maintenance compressed air filter for the preparation area (1/4“ male thread).

SATA® filter 101 prep™

Single-stage activated charcoal filter to convert the SATA filter 100 prep
to a filter 103 prep

Low maintenance compressed air filter for the preparation area (1/4“  male thread).
 
 
 

Material Supply Systems for an Optimised Painting Process

 

For the application of larger amounts of paint, the SATA material supply systems in combination with pressure fed SATA spray guns are the perfect solution. The universally applicable systems feature easy handling, sturdy construction, long lifetime and little maintenance.

 
 
 

SATA® mini set 2™

Paint pressure tank with greatest mobility

2 l filling capacity to supply pressure fed spray guns.

SATA® paint pressure tank 10 litres 

Material supply system for continuous operation

10 l filling capacity to supply pressure fed spray guns.

SATA® paint pressure tank 24 litres / 48 litres

Material supply system for continuous operation

Special version with material outlet at the bottom side of the tank for especially high ViscosityMaterial viscosity is the time (in seconds) it takes the material to completely flow out of a standardized container. There are different measuring methods available. Please find the corresponding chart attached. X» materials.

Double diaphragm pump

SATA® vario top spray™

Efficient double diaphragm pump technology for high material
supply and surface efficiency

Finest atomisation of preparation materials and top coats in combination with the well-known, high-quality SATA spray guns (e.g. SATAjet 1000 K / RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive.   Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»).
 
 
 

Cleaning systems for spray guns

 

Spray gun cleaning is not a popular task amongst painters. SATA cleaning devices reliably help achieve correct gun cleaning which is of vital importance not only in order to maintain proper function of the spray gun, but also to increase the process security in the bodyshop.

 
 
 

SATA® clean RCS™ | SATA® clean RCS™ compact | 
SATA® clean RCS™ micro 

Quick and thorough intermediate cleaning

Reliable colour changes when using SATA RPSRPS = Rapid Preparation System - One-way cup system for the efficient application of paint. It is the ideal system for mixing, painting, refilling and storing of left-over paint.The SATA RPS is available in 0.3 l, 0.6l and 0.9l cup sizes and fits on the following spray gun models without adapter:
SATAjet 4000 BSATAjet 3000 BSATAjet 1000 BSATAjet 100 BSATAjet 2000 HVLP (2. Gen.)SATAjet RPSATAminijet 3000 B HVLP (with SATA RPS 0.3 l “minijet”)X» or other disposable cup systems.

SATA® multi clean™ 2

Spray gun washing machine with integrated exhaust system

Thorough and gentle cleaning of the entire spray gun, the cup and the lid.
 
 
 
 

Product Quick Finder

 
 
 
 
 
 

Discontinued models

 
 
 
 
 
 

Website assistant

Here you can find help to most topics:

Or have a look at: 

 
 
 
 
 
 

Register Premium Warranty

 
 
 
 
 
 

Practice Tips

PraxistippsImportant hints for gun cleaning and maintenance

PDF-Download




Download PDF

 
 
 

© 2002-2017 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany. All photos, logos and text contained on this web site are the property of SATA GmbH & Co. KG. Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.